Hilti CP 636 Firestop Mortar is a cement-based fire protection solution designed to prevent the spread of fire and smoke through large openings in walls and floors. It is particularly effective in sealing penetrations involving cables, cable trays, and non-combustible pipes.

🔍 Product Overview

• Type: Firestop mortar with perlite

• Base Materials: Concrete, Masonry

• Color: Grey

• Packaging: 20 kg bags

• Mix Ratio: Approximately 2.5:1 (mortar to water by weight)

• Cured Density: 700–900 kg/m³

• Compressive Strength: Up to 2.9 N/mm² after 28 days

• Application Temperature Range: 5°C to 80°C

• Working Time: Approximately 45 minutes

• Setting Time: Approximately 10 hours

• Shelf Life: 12 months (unopened, stored properly)

✅ Key Features

• Adjustable Consistency: Can be applied using a trowel or commercially available pumps, allowing for flexibility in application.

• Thermal Insulation: Provides excellent thermal insulating properties, enhancing fire resistance.

• Minimal Shrinkage: Exhibits minimal shrinkage during curing and does not spall in the event of a fire.

• High Yield: Offers a high yield, making it cost-effective for large-scale applications.

• Chemical Composition: Contains no asbestos, phenol, or halogen constituents, ensuring safety and compliance with environmental standards.
   

  🏗️ Applications

• Firestopping: Permanent firestopping of cables, cable trays, and non-combustible pipes in medium to large wall and floor openings.

• Penetration Sealing: Suitable for single, multiple, and mixed penetrations in concrete and masonry structures.

• Integration with Other Products: Can be used in combination with other firestop products for comprehensive fire protection solutions.

• ---

  🛠️ Installation Guidelines

• Surface Preparation: Clean and pre-moisten the sides of the opening. Ensure that cables and cable trays are dry and free from dust, oil, or grease.

• Mixing: Mix CP 636 firestop mortar in a mortar-to-water ratio of about 3:1 by volume. Pour water first, then add CP 636 into the bucket. Mix thoroughly using a drilling machine and mixer. Do not add any other binding agents or additives.

• Application: Apply the ready-mixed mortar with a trowel or pump into the prepared opening. Compact the mortar to eliminate gaps and voids. Smooth the surface as with ordinary concrete.

• Form Removal: Depending on the consistency, forms can typically be removed after 4 hours for wall applications.