🏷️ Product Name

MULTIFIX MF-EX2 – 400ML Cartridge
Type: High-strength, two-component epoxy adhesive for anchoring

📦 Packaging

• Size: 400 mL coaxial cartridge

• System: Includes static mixing nozzle for immediate use

• Color: Gray after mixing

• Storage: Store between 5°C and 25°C in a dry place

• Shelf Life: 12 months (unopened, under proper storage conditions)

🛠️ Applications

• Anchoring threaded rods and reinforcing bars (rebar) into concrete

• Heavy-duty structural anchoring in solid concrete (cracked/uncracked)

• Suitable for dry, damp, or water-filled holes

• Ideal for overhead, horizontal, and vertical installations

⚙️ Technical Specifications

• Mix Ratio: 3:1 (Resin:Hardener by volume)

• Mixed Density: Approx. 1.68 kg/L

• Open Time (Workability):

  • ~20–30 min at 20–25°C (dry)

  • Shorter at higher temperatures

• Curing Time:

  • Functional cure: ~60 minutes at 25°C (dry concrete)

  • Full cure: Up to 24 hours depending on conditions

• Temperature Range for Use: +5°C to +40°C

• Cleaning Method: Use blow–brush–blow cleaning cycle before injection

🧪 Performance Characteristics

• Anchor Sizes:

  • Threaded Rods: M8 to M32

  • Rebar: Ø12 to Ø40 mm

• Load Resistance: High pull-out and shear strength values

• Gap Filling: Up to 0.8 mm

• Durability: Designed for ≥50 years service life

• Fire Resistance: Certified for up to 4 hours (tested conditions)

🧷 Certifications

• ETA certified for threaded rod anchoring in concrete

• ETA certified for post-installed rebar connections

• Fire-tested according to international standards

• Approved for use in structural applications

🏗️ Installation Procedure (Summary)

1. Drill the correct hole diameter and depth.

2. Clean the hole thoroughly: blow, brush, blow again.

3. Insert the mixing nozzle onto the cartridge.

4. Dispense a small amount of epoxy outside the hole (until color is uniform).

5. Inject epoxy from the bottom up, filling approx. 2/3 of the hole.

6. Insert the rod or bar with a twisting motion.

7. Allow to cure fully before applying load.

✅ Key Benefits

• No shrinkage after curing

• Excellent resistance to chemicals, moisture, and vibration

• Easy installation – no special tools required

• Works in both overhead and water-affected applications